ABB SM500F User Manual page 84

SM500F
Field mountable paperless recorder
82
Set access privileges for selected user.
e-Sign
Logging
Batch
Configuration (No access)
Config (Load)
Configuration (Ltd) – The selected user is able to:
Configuration (Full) – The selected user is allowed full configuration
Alarm acknowledge – The selected user is able to acknowledge
Note. The System Administrator (User 1) only is able to change the
Security settings.
Enter an initial password for the selected user.
Note. The user may subsequently change this password.
– The selected user is able to enter an electronic
signature.
– The selected user is able to access the Logging
level.
– The selected user is able to start and stop batch
recording – see Appendix F.3, page 174.
– The selected user is unable to access the
Configuration level.
– The selected user is unable to make any
configuration changes
configurations from external media.
• Change alarm trip points, hysteresis and time
hysteresis settings.
• Make input adjustments for analog input
boards.
• Load configurations from external media only.
access with the exception of access to the
Security settings.
alarms.
7 Configuration
but can load
IM/SM500F Rev. Z