122
Safety function checks in the maintenance routine
It is a good practice to check the operation of the optional safety functions at
appropriate intervals.
If the drive is equipped with optional safety functions +Q950, +Q951, +Q952, +Q954,
+Q963, +Q964 or Q968, include the safety function tests described in Safety options
instructions for ACS800 drives (3AUA0000026238 [English]) to the routine
maintenance program of the machinery that the drive runs.
If you replace a circuit board or wire set inside the drive module, re-test the safety
function.
If you detect any failure in safety functions, contact your local ABB representative.
Other maintenance actions
Replacement of a supply inverter or brake modules
To replace supply, inverter or three-phase brake modules, follow the instructions on
the module removal and refitting given in chapter
modules are identical with the inverter modules.
Maintenance
Electrical
installation. The brake