3.3.
3.3.1.
3.3.2.
16
COM600 series, Version 5.0
DNP 3.0 Serial Master (OPC) User's Manual
In the object tree communication view, you can see the DNP OPC Server object and its
child objects such as channels, devices, and data objects. After you have added the
necessary objects to the object tree in the communication structure, configure them, see
3.4.1, General information about configuring objects.
When configuring OPC servers the following characters cannot
be used in object names: \ ` ' ' #
Building object tree
General information about building object tree
The object tree is built in the Communication structure of SAB600. It is built by adding
objects in a logical order starting from the Gateway.
You have several possible ways to add objects to the object tree in the Communication
structure:
•
You can right-click the object to which you want to add a child object. Then select
New > Object type group > Object name, for example
•
You can right-click the object type and select New > New. A New Object window
appears. Select the object type you want to add and click OK or double-click it.
•
You can copy the object.
Add the objects in the following order:
1. Gateway
2. DNP Serial OPC Server
3. DNP Serial Channel
4. Logical Device objects
5. Logical Node objects
6. Data objects
For information on building a substation structure, see COM600 HMI Configuration
Manual.
Adding Gateway object
To start building the object tree, add a Gateway object in the Communication structure
by selecting the project name, right-click it and select New > Communication > Gate-
way.
1MRS756567