ABB COM600 Series User Manual page 35

1MRS756567 COM600 series, Version 5.0
DNP 3.0 Serial Master (OPC) User's Manual
Property/ Para- Value or Value range/ Default
meter
Sub-Type
Subtype Simple
Data Class Spe-
cific
Indication Object Analog input (30, 32)
Analog output (40)
Default: Analog input (30, 32)
Scale and Unit
Multiplier Default: Deka
Phase Number of Default: 0
Decimals
Scale Default: None
Unit Default: Dimensionless
Limit Value Super-
vision
Max
Min
Table 3.4.8.7-2 Additional configurable properties for Sub-Type Limit Check
Property/ Para- Value or Value range/ Default
meter
Sub-Type Limit Check
Limit Value Super-
vision
High Default: 0
High-High Default: 0
Low Default: 0
Low-Low Default: 0
Description
MV sub-type
Object number for indication.
Specifies the multiplier for current SI unit.
Specifies the number of decimals shown
in HSI. (0 to 9)
Scale used with this type.
SI unit for measurement as described in
IEC 61850
Maximum value for measurement
Minimum value for measurement
Description
MVSubTypeDescription
High limit for measurement. Event is cre-
ated when value crosses the limit.
High-high limit for measurement. Event is
created when value crosses the limit.
Low limit for measurement. Event is cre-
ated when value crosses the limit.
Low-low limit for measurement. Event is
created when value crosses the limit.
35