ABB COM600 Series User Manual page 47

1MRS756567 COM600 series, Version 5.0
DNP 3.0 Serial Master (OPC) User's Manual
Property/ Para- Value or Value range/ Default
meter
Net Multiplier Default: Deka
Net Scale Default: None
Net Unit Default: Dimensionless
Net Number of 0 to 9
Decimals
Res Multiplier Default: Deka
Res Scale Default: None
Res Unit Default: Dimensionless
Res Number of 0 to 9
Decimals
Phase Limit Value
Supervision
Max Default: 20000
Min Default: 0
Neutral Limit Value
Supervision
Max Default: 20000
Min Default: 0
Table 3.4.8.18-2 Additional configurable properties for Sub-Type WYE Full
Property/ Para- Value or Value range/ Default
meter
Sub-Type WYE Full
Phase Limit Value
Supervision
High Default: 0
High-High Default: 0
Low Default: 0
Low-Low Default: 0
Neutral Limit Value
Supervision
High Default: 0
Description
Specifies the multiplier for the current SI
unit.
Scale for Net used with this data object.
Unit for Net.
Specified the number of decimals shown
in HSI.
Specifies the multiplier for the current SI
unit.
Scale for Res used with this data object.
Unit for Res.
Specified the number of decimals shown
in HSI.
Maximum value for measurement.
Minimum value for measurement.
Maximum value for measurement.
Minimum value for measurement.
Description
Subtype of WYE.
High limit for measurement. Event is cre-
ated when value crosses the limit.
High-high limit for measurement. Event is
created when value crosses the limit.
Low limit for measurement. Event is cre-
ated when value crosses the limit.
Low-low limit for measurement. Event is
created when value crosses the limit.
High limit for measurement. Event is cre-
ated when value crosses the limit.
47