Event Definitions; Using Scales - ABB COM600 Series User Manual

3.4.9.
3.4.10.
48
COM600 series, Version 5.0
DNP 3.0 Serial Master (OPC) User's Manual
Property/ Para- Value or Value range/ Default
meter
High-High Default: 0
Low Default: 0
Low-Low Default: 0
Table 3.4.8.18-3 Additional configurable properties for Sub-Type WYE Full
Property/ Para- Value or Value range/ Default
meter
Sub-Type WYE Full
Net Limit Value
Supervision
High Default: 0
High-High Default: 0
Low Default: 0
Low-Low Default: 0
Res Limit Value
Supervision
High Default: 0
High-High Default: 0
Low Default: 0
Low-Low Default: 0

Event definitions

For information on event definitions, refer to COM600 User's Manual.

Using scales

For information on using scales, refer to COM600 User's Manual.
Description
High-high limit for measurement. Event is
created when value crosses the limit.
Low limit for measurement. Event is cre-
ated when value crosses the limit.
Low-low limit for measurement. Event is
created when value crosses the limit.
Description
Subtype of WYE
High limit for measurement. Event is cre-
ated when value crosses the limit.
High-high limit for measurement. Event is
created when value crosses the limit.
Low limit for measurement. Event is cre-
ated when value crosses the limit.
Low-low limit for measurement. Event is
created when value crosses the limit.
High limit for measurement. Event is cre-
ated when value crosses the limit.
High-high limit for measurement. Event is
created when value crosses the limit.
Low limit for measurement. Event is cre-
ated when value crosses the limit.
Low-low limit for measurement. Event is
created when value crosses the limit.
1MRS756567