Protection Activation Information (Act) - ABB COM600 Series User Manual

1MRS756567
3.4.8.3.
COM600 series, Version 5.0
DNP 3.0 Serial Master (OPC) User's Manual
Property/ Para- Value or Value range/ Default
meter
Time And Type Send as static data (always
Variation without time)
Event without time
Event with time
Event with relative time (valid
for binary inputs only)
Default: Event with time

Protection activation information (ACT)

Table 3.4.8.3-1 Configurable ACT properties for OPC client
Property/ Para- Value or Value range/ Default
meter
Basic
Common Data ACT
Class
Addresses
General Index 0...65535
Default: 0
Neutral Index 0...65535
Default: 0
Phase A Index 0...65535
Default: 0
Phase B Index 0...65535
Default: 0
Phase C Index 0...65535
Default: 0
Common
Class Class 0...3
Default: Class 0
Update Rate 0...65535
Default: 0
Description
Specifies the type of the timestamp a
message is sent with.
Description
Common data class according to IEC
61850.
General Index
Neutral Index
Phase A Index
Phase B Index
Phase C Index
Class of ASDU. Data sent from the slave
to the master can be assigned to four
classes. Data in class 1 is sent with higher
priority than data in class 3.
Maximum update rate of signal state
changes between the OPC server and
client in milliseconds. 0 means that the
server sends all the changes to the client.
31