Integer Status (Ins); Controllable Single Point (Spc) For Opc Internal Data - ABB COM600 Series User Manual

3.4.7.2.
3.4.7.3.
28
COM600 series, Version 5.0
DNP 3.0 Serial Master (OPC) User's Manual

Integer status (INS)

Table 3.4.7.2-1
Property/Para- Value or Value range/ Default
meter
Basic
Common Data INS
Class
Addresses
Item Tag Path Default: None

Controllable single point (SPC) for OPC internal data

Table 3.4.7.3-1 Configurable SPC (for OPC internal data) properties for OPC Servers
Property/Para- Value or Value range/ Default
meter
Basic
61850-Type SPC
Sub-Type
Sub Type
Addresses
Control Coil 0...65535
Indication Coil/Input 0...65535
Description
Common data class according to IEC
61850
Item tag path for the internal status
information. The internal server tags that
can be used are located in the Attributes
nodes that are located under the root, line,
and IED nodes. When an attribute tag is
referred to in the internal item definitions
below, it is possible to use either the whole
tag path or just the path relative to the IED
(the internal tags are configured per IED);
for example, Attributes\Diagnostic coun-
ters\Transmitted data messages. When
the whole path is used, it must be pre-
ceded by a slash (/) character, for
example, /Channel Name\Attributes\Dia-
gnostic counters\Transmitted data mes-
sages.
Description
61850-Type
Sub type of object
Coil address for the control. Coil (0X refer-
ence) address range 1...9999. Address 0
equals to no information available.
Coil or input address for the indication.
Coil = 0X reference address range
1...9999 or input = 1X reference address
range 10001...19999. Address 0 equals
to no information available.
1MRS756567