ABB COM600 Series User Manual page 68

Requires Data Link Layer Confirmation:
Pulse Off
[ ] Never [ ] Always [ ] Sometimes [x] Configurable
Latch On
[ ] Never [ ] Always [ ] Sometimes [x] Configurable
Latch Off
[ ] Never [ ] Always [ ] Sometimes [x] Configurable
Queue
[x] Never [ ] Always [ ] Sometimes [ ] Configurable
Clear Queue
[x] Never [ ] Always [ ] Sometimes [ ] Configurable
FILL OUT THE FOLLOWING ITEM FOR MASTER DEVICES ONLY:
Expects Binary Input Change Events:
[x] Either time-tagged or non-time-tagged for a single event
[ ] Both time-tagged and non-time-tagged for a single event
[ ] Configurable (attach explanation)
Code Function
0 Confirm
1 Read
2 Write
3 Select
4 Operate
68
COM600 series, Version 5.0
DNP 3.0 Serial Master (OPC) User's Manual
Supported function codes
Table A1-2 Supported function codes (* = CO attribute is needed )
Description
Transfer Function Codes
Message fragment confirmation
No response
Request objects from outstation
Respond with requested objects
Store the specified objects to outstation
Respond with status of operation
Control Function Codes
Select the output point of outstation
Respond with status of control point
Set the output that has previously been selected
Respond with status of control point
1MRS756567
Supported
Yes
Yes
Yes
Yes
Yes