4.
4.1.
4.2.
4.3.
52
COM600 series, Version 5.0
DNP 3.0 Serial Master (OPC) User's Manual
Operation
About this section
This section describes the basic operation procedures you can carry out after the server
has been configured.
After reading this section, you can, for example, monitor and control network connections.
Monitoring and controling is done by using the Online diagnostics function in SAB600.
Activating COM600 with new configurations
For information about activating COM600 with new configuration, see COM600 User's
Manual.
Server diagnostics
Diagnostic events can be monitored and controlled using the Diagnostic AE Client
function. Click Refresh to update the status information. To be able to receive events
from a certain device, diagnostic events must be enabled for this respective device.
You have the following alternatives:
•
View version information
•
Reset the OPC Server
•
View the event log file
•
Clear the log file
Figure 4.3-1 DNP OPC Client Diagnostic AE client
1MRS756567
dnp_serial_opc_client_ae.png