Integer Status (Ins) - ABB COM600S User Manual

1MRS756445
3.4.7.2.
3.4.7.3.
COM600 series, Version 4.1
Modbus TCP Master (OPC) User's Manual
Modbus OPC Server supports three internal data object types that provide status
information:
• 3.4.7.2, Integer status (INS)
• 3.4.7.4, Single point status (SPS)
• 3.4.7.3, Controllable single point (SPC) for OPC internal data

Integer status (INS)

Table 3.4.7.2-1 Configurable INS (for OPC internal data) properties for OPC Servers
Property/Para- Value or Value range/ Default
meter
Basic
Common Data INS
Class
Addresses
Item Tag Path Default: None
OPC Alarm and
Event
Indication Event Default: None
Controllable single point (SPC) for OPC internal data
Table 3.4.7.3-1 Configurable SPC (for OPC internal data) properties for OPC Servers
Property/Para- Value or Value range/ Default
meter
Basic
61850-Type SPC
Sub-Type
Description
Common data class according to IEC
61850
Item tag path for the internal status
information. The internal server tags that
can be used are located in the Attributes
nodes that are located under the root, line,
and IED nodes. When an attribute tag is
referred to in the internal item definitions
below, it is possible to use either the whole
tag path or just the path relative to the IED
(the internal tags are configured per IED);
for example, Attributes\Diagnostic coun-
ters\Transmitted data messages. When
the whole path is used, it must be pre-
ceded by a slash (/) character, for
example, /Channel Name\Attributes\Dia-
gnostic counters\Transmitted data mes-
sages.
Indication event used with this data object
Description
61850-Type
27