Controllable Double Point (Dpc) - ABB COM600S User Manual

1MRS756445
3.4.8.8.
COM600 series, Version 4.1
Modbus TCP Master (OPC) User's Manual
Property/Para- Value or Value range/ Default
meter /Example
Phase CA Mag- Default
nitude Format
Word
Integer
Long MSW first
Long MSW last
Float MSW first
Float MSW last
Bit
Default: Word
Scale and Unit
Multiplier Default: Kilo
Scale Default: None
Unit Default: Volt
Phase Limit Value
Supervision
High Default: 0
High-High Default: 0
Low Default: 0
Low-Low Default: 0
Max 20000
Min 0

Controllable double point (DPC)

Controllable Double Point (DPC) for OPC servers with Modbus IED supports the fol-
lowing subtypes:
•
BIT_DO
•
SACE
• GENERIC_CONTROL
• BIT_DPU_SBO
Description
Data format for phase CA magnitude.
Specifies the multiplier for current SI unit.
Scale used for the measurements.
SI unit for measurement as described in
IEC61850.
High limit for measurement. Event is cre-
ated, when value crosses the limit.
High-high limit for measurement. Event is
created, when value crosses the limit.
Low limit for measurement. Event is cre-
ated, when value crosses the limit.
Low-low limit for measurement. Event is
created, when value crosses the limit.
Maximum value for measurement.
Minimum value for measurement.
39