Table of Contents
Advertisement
1MRS756445
3.
3.1.
3.2.
COM600 series, Version 4.1
Modbus TCP Master (OPC) User's Manual
Configuration
About this section
This section guides you in the configuration tasks required before you can start using
the Modbus OPC Server. For information on the IEC 61850 data modeling, refer to
COM600 User's Manual.
1. Select File > Open/Manage Project....
2. In the Open/Manage Project dialog, select the required location for the project:
•
Projects on my computer
•
Projects on network
3. Select New Project on the left.
•
Enter a Project Name. The Description is optional.
4. Click Create.
5. Click Open Project.
Overview of configuration
Before you can start using the Modbus OPC Server, you need to build and configure an
object tree in SAB600 to define the Communication structure.
The possible objects are:
•
Gateway
•
Modbus OPC Server
•
Modbus Subnetwork
•
Modbus IED
•
Logical Device objects
•
Logical Node objects
•
Data objects
Figure 3.2-1 shows an example view of SAB600 including an object tree in the commu-
nication structure on the left and Object Properties window displaying the object properties
on the right.
When configuring OPC servers the following characters cannot
be used in object names: \ ` ' ' #
For information about configuring parameters for Parameter Setting in HMI, see COM600
HMI Configuration Manual.
17
Advertisement
Table of Contents
