4.
4.1.
4.2.
4.3.
72
COM600 series, Version 4.1
Modbus TCP Master (OPC) User's Manual
Operation
About this section
This section describes the basic operation procedures you can carry out after the object
properties for the Modbus OPC Server have been configured.
After this, you can, for example, monitor and control the condition of connections in a
Modbus network. This is done by using the Online diagnostics function in SAB600.
Activating COM600 with new configurations
For information about activating COM600 with new configuration, see COM600 User's
Manual.
OPC Server diagnostics
To view the OPC Server diagnostics, right-click the OPC Server object and select Online
diagnostics.
Figure 4.3-1 OPC Server diagnostics
You have the following alternatives:
•
to view version information
•
to reset the OPC Server
•
to view the event log file
•
to clear the log file
1MRS756445
AE_diagnostic_client.bmp