ABB COM600S User Manual page 65

1MRS756445
3.4.8.18.
COM600 series, Version 4.1
Modbus TCP Master (OPC) User's Manual
Table 3.4.8.17-2 Configurable SPS properties for OPC servers with Modbus device,
subtype BIT_DPU_MCD
Property/Para- Value or Value range/ Default
meter /Example
Basic
61850-Type SPS
Subtype BIT
BIT_DPU_MCD
Indication Coil/Input 0 to 65535
Default: 0
Bit mask 0 to 65535
WYE
Table 3.4.8.18-1 Configurable WYE properties for OPC servers with Modbus device
Property/Para- Value or Value range/ Default
meter /Example
Basic
61850-Type WYE
Sub Type
Sub Type WYE full
WYE simple
Default: WYE full
Phase A
Addresses
Phase A Angle 0 to 65535
Default: 0
Description
61850-Type
Coil or input address for the indication.
Coil = 0X reference address range 1 to
9999 or input = 1X reference address
range 10001 to 19999
Address 0 equals to no information avail-
able
Bit mask for indication
Description
61850-Type
Sub type for WYE.
Holding or input register address for the
phase A angle. Holding register = 4X ref-
erence address range 40001 to 49999 or
input register = 3X reference address
range 30001 to 39999. Address 0 equals
to no information available.
65