Toshiba IP edge General Description Manual page 138

Appendix – Specifications
Capacities
Table 20 System Feature Capacities(continued)
Ring Tones (Internal Call Ring Tones for IP telephones)
Speed Dial - Station SD numbers per system
Speed Dial - System SD numbers per system
Tenants
Destination Restriction Level (DRL) Classes
Verified Account Codes
Voice Mail SMDI Interface
SIP URI per system
SIP Trunk service Index
LCR Exception Table Size
MAX digit number for LCR Route Plans
MAX Number of LCR Route Plans
CSTA Device Monitors
CSTA Call Monitors
1. SMDI and SMDR require a LAN interface.
2. Conference channels are used dynamically, so the maximum number of simultaneous conferences is
affected by the number of conference members in each conference. The total number of members in
simultaneous conferences cannot exceed the total number of conference channels. The total number of
conference channels available is configured through Enterprise Manager, and each conference channel
requires one Media Server Resource. Each conference can have up to eight members.
Third party SIP endpoints cannot be the originator of a conference call.
3. Each DNIS/DID Number uses up to three Routing Destination Numbers (Day1, Day2 and Night) in any
combination of (1~6) and (7~32) digit numbers.
4. This is not the number of simultaneous OCA but the terminal number of OCA available. (Simultaneous
number is limited by maximum capacity of line and call).
5. The maximum number of paged stations is limited to the lesser of the number of Media Server generic
channels available at the time of paging and to this maximum.
6. Up to 100 Station SD numbers, allocated in increments of 10, can be programmed per station.
124
Features
6
1
EC Server EM Server
10 10
8,400 8,400
800 800
8 8
16 16
4,000 4,000
1 1
3,000 3,000
128 128
2,500 2,500
19 19
128 128
2,304 2,304
560 560
IPedge General Description
EP Server
10
8,400
800
8
16
4,000
1
3,000
128
2,500
19
128
56
56
03/16