Epson 0C88832 Technical Manual page 15

Option list
The following options can be set for the E0C88832/88862. Multiple specifications are available in each
option item as indicated in the Option List. Select the specifications that meet the target system and check
the appropriate box.
The option selection is done interactively on the screen during WINFOG execution, using this option list as
reference.
E0C88832/88862 mask option list (1/2)
1 OSC1 SYSTEM CLOCK
2 OSC3 SYSTEM CLOCK
3 MULTIPLE KEY ENTRY RESET
• Combination ...
4 SVD RESET
5 INPUT PORT PULL UP RESISTOR
• K00 ...................
• K01 ...................
• K02 ...................
• K03 ...................
• K04 ...................
• K05 ...................
• K06 ...................
• K07 ...................
• K10 ...................
• RESET ..............
6 I/O PORT PULL UP RESISTOR
• P10 ....................
• P11 ....................
• P12 ....................
• P13 ....................
• P14 ....................
• P15 ....................
• P16 ....................
• P17 ....................
E0C88832/88862 TECHNICAL MANUAL
1. Crystal
2. External Clock
3. CR
4. Crystal (with Gate Capacity)
1. Crystal
2. Ceramic
3. CR
4. External Clock
1. Not Use
2. Use K00, K01
3. Use K00, K01, K02
4. Use K00, K01, K02, K03
1. Not Use
2. Use
1. With Resistor
1. With Resistor
1. With Resistor
1. With Resistor
1. With Resistor
1. With Resistor
1. With Resistor
1. With Resistor
1. With Resistor
1. With Resistor
1. With Resistor
1. With Resistor
1. With Resistor
1. With Resistor
1. With Resistor
1. With Resistor
1. With Resistor
1. With Resistor
2. Gate Direct
2. Gate Direct
2. Gate Direct
2. Gate Direct
2. Gate Direct
2. Gate Direct
2. Gate Direct
2. Gate Direct
2. Gate Direct
2. Gate Direct
2. Gate Direct
2. Gate Direct
2. Gate Direct
2. Gate Direct
2. Gate Direct
2. Gate Direct
2. Gate Direct
2. Gate Direct
EPSON
1 INTRODUCTION
9