HP FlexFabric 12500 Series Network Management And Monitoring Command Reference page 141

Syntax
snmp-agent community { read | write } [ simple | cipher ] community-name [ mib-view view-name ] [ acl
acl-number | acl ipv6 ipv6-acl-number ] *
undo snmp-agent community { read | write } [ cipher ] community-name
Default
No SNMP community exists.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
read: Assigns the specified community the read only access to MIB objects. A read-only community can
only inquire MIB information.
write: Assigns the specified community the read and write access to MIB objects. A read and write
community can configure MIB information.
simple: Sets a community name in plain text. For security purposes, this community name is saved in
cipher text.
cipher: Sets and saves the community name in cipher text.
community-name: Sets a case-sensitive community name. In plain text, the community name must be a
string of 1 to 32 characters. In cipher text, the community name must be a string of 33 to 73 characters.
Input a string as escape characters after a backslash (\).
mib-view view-name: Specifies the MIB view available for the community. The view-name argument
represents a MIB view name, a string of 1 to 32 characters. A MIB view represents a set of accessible
MIB objects. If no MIB view is specified, the specified community can access the MIB objects in the
default MIB view ViewDefault.
acl acl-number: Specifies a basic IPv4 ACL to filter NMSs by source IPv4 address. The acl-number
argument represents an ACL number in the range of 2000 to 2999. In the specified community, only
NMSs with an IPv4 address permitted in the ACL can access the SNMP agent. If no ACL is specified, the
specified ACL does not exist, or the specified ACL does not have any rules, all NMSs in the SNMP
community can access the SNMP agent. For detailed information about ACL, see ACL and QoS
Configuration Guide.
acl ipv6 ipv6-acl-number: Specifies a basic IPv6 ACL to filter NMSs by source IPv6 address. The
ipv6-acl-number argument represents an ACL number in the range of 2000 to 2999. In the specified
community, only NMSs with an IPv6 address permitted in the IPv6 ACL can access the SNMP agent. If
no ACL is specified, the specified ACL does not exist, or the specified ACL does not have any rules, all
NMSs in the SNMP community can access the SNMP agent.
Usage guidelines
This command is for SNMPv1 and SNMPv2c, and is supported only in non-FIPS mode.
To set and save a community name in plain text, do not specify the simple or cipher keyword.
You can create up to 10 SNMP communities by using the snmp-agent community command. To create
more SNMP communities, use the snmp-agent usm-user { v1 | v2c } command.
133