Type: Remote source
Status: Incomplete
Mirroring port:
GigabitEthernet3/0/4
Remote probe VLAN: 1900
Mirroring group 9:
Type: Remote destination
Status: Active
Monitor port: GigabitEthernet3/0/6
Remote probe VLAN: 1901
Table 40 Command output
Field
Mirroring group
Type
Status
Sampler
Mirroring port
Mirroring VLAN
Monitor port
mirroring-group
Use mirroring-group to create a mirroring group.
Use undo mirroring-group to remove mirroring groups.
Syntax
mirroring-group group-id { local [ sampler sampler-name ] | remote-destination | remote-source
[ sampler sampler-name ] }
undo mirroring-group { group-id | all | local | remote-destination | remote-source }
Default
No mirroring group exists on a device.
Views
System view
Both
Description
Number of the mirroring group.
Type of the mirroring group:
•
Local.
•
Remote source.
•
Remote destination.
Status of the mirroring group:
•
Active—The configured mirroring group has taken effect.
•
Incomplete—The mirroring group is not configured completely and cannot
take effect.
Sampler name:
•
If the sampler fails to be referenced, this field displays sampler name
(failed).
•
If no sampler is configured, this field is blank.
Source port.
Source VLAN.
Destination port.
182