Reaction Checked-Element Icpif - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Predefined user roles
network-admin
mdc-admin
Usage guidelines
This command places you in raw request view and deletes the content of the previously configured GET
request.
Examples
# Enter raw request view and specify the content of a request for the HTTP operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type http
[Sysname-nqa-admin-test-http] raw-request
[Sysname-nqa-admin-test-http-raw-request]
# In HTTP template view, enter raw request view and specify the content of a request for the HTTP
operation.
<Sysname> system-view
[Sysname] nqa template http httptplt
[Sysname-nqatplt-http-httptplt] raw-request
[Sysname-nqatplt-http-httptplt-raw-request]

reaction checked-element icpif

Use reaction checked-element icpif to configure a reaction entry for monitoring the ICPIF value in the
voice operation.
Use undo reaction to delete the specified reaction entry.
Syntax
reaction item-number
[ action-type { none | trap-only } ]
undo reaction item-number
Default
No reaction entry for monitoring ICPIF values is configured.
Views
Voice operation view
Predefined user roles
network-admin
mdc-admin
Parameters
item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.
threshold-value: Specifies threshold range.
upper-threshold: Specifies the upper limit in the range of 1 to 100.
checked-element icpif
53
threshold-value upper-threshold lower-threshold