Reaction Checked-Element Rtt - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Related commands
Track (High Availability Command Reference)

reaction checked-element rtt

Use reaction checked-element rtt to configure a reaction entry for monitoring packet round-trip time.
Use undo reaction to delete the specified reaction entry.
Syntax
reaction item-number checked-element rtt threshold-type { accumulate accumulate-occurrences |
average } threshold-value upper-threshold lower-threshold [ action-type { none | trap-only } ]
undo reaction item-number
Default
No reaction entry for monitoring packet round-trip time is configured.
Views
UDP jitter operation view, voice operation view
Predefined user roles
network-admin
mdc-admin
Parameters
item-number: Assigns an ID to the reaction entry, in the range of 1 to 10.
threshold-type: Specifies a threshold type.
accumulate accumulate-occurrences: Checks the total number of threshold violations. Available value
ranges include:
• 1 to 15000 for the UDP jitter operation.
1 to 60000 for the voice operation.
•
average: Checks the packet average round-trip time.
threshold-value: Specifies threshold range in milliseconds.
upper-threshold: Specifies the upper limit in the range of 0 to 3600000.
lower-threshold: Specifies the lower limit in the range of 0 to 3600000. It must not be greater than the
upper limit.
action-type: Specifies what action to be triggered. The default action is none.
none: Specifies the action of only displaying results on the terminal display.
trap-only: Specifies the action of displaying results on the terminal display and meanwhile sending
SNMP trap messages to the NMS.
Usage guidelines
You cannot edit a reaction entry after it is created. To change the attributes in a reaction entry, use undo
reaction to delete the entry first and reconfigure a new one.
Only successful probe packets are monitored. Statistics about failed probe packets are not collected.
63