Raw-Request - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Syntax
probe timeout timeout
undo probe timeout
Default
The timeout time of a probe is 3000 milliseconds.
Views
DHCP operation view, DNS operation view, DLSw operation view, FTP operation view, HTTP operation
view, ICMP echo operation view, SNMP operation view, TCP operation view, UDP echo operation view,
any NQA template view
Predefined user roles
network-admin
mdc-admin
Parameters
timeout: Specifies the probe timeout time in milliseconds. The available value ranges include:
10 to 86400000 for the FTP or HTTP operation.
•
10 to 3600000 for the DHCP, DNS, DLSw, ICMP echo, SNMP, TCP, or UDP echo operation.
•
Usage guidelines
If a probe does not complete within the period, the probe is timed out.
Examples
# Set the probe timeout time for the DHCP operation to 10000 milliseconds.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type dhcp
[Sysname-nqa-admin-test-dhcp] probe timeout 10000
# In HTTP template view, set the probe timeout time for the HTTP operation to 10000 milliseconds.
<Sysname> system-view
[Sysname] nqa template http httptplt
[Sysname-nqatplt-http-httptplt] probe timeout 10000

raw-request

Use raw-request to enter the raw-request view and specify the content of an HTTP request.
Use undo raw-request to delete the content of an HTTP request.
Syntax
raw-request
undo raw-request
Default
No contents are specified.
Views
HTTP operation view, HTTP template view
52