Field
Orgtime
Rcvtime
Xmttime
Filter order
Reference clock status
Total sessions
display ntp-service status
Use display ntp-service status to display NTP service status.
Syntax
display ntp-service status
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Examples
# Display NTP service status after time synchronization.
<Sysname> display ntp-service status
Clock status: synchronized
Clock stratum: 2
System peer: LOCAL(0)
Local mode: client
Reference clock ID: 127.127.1.0
Leap indicator: 00
Clock jitter: 0.000977 s
Stability: 0.000 pps
Clock precision: 2^-10
Root delay: 0.00000 ms
Root dispersion: 3.96367 ms
Reference time: d0c5fc32.92c70b1e
# Display the NTP service status when time is not synchronized.
<Sysname> display ntp-service status
Description
Originate timestamp in the NTP message.
Receive timestamp in the NTP message.
Transmit timestamp in the NTP message.
Sample information order.
Status of the local clock. The field is displayed only when you use
the ntp-service refclock-master command to set the local clock as a
reference clock.
When the reach field of the local clock is 255, the field is displayed
as working normally. Otherwise, the field is displayed as working
abnormally.
Total number of associations.
Wed, Dec 29 2010 18:28:02.573
88