Next-Hop - HP FlexFabric 12500 Series Network Management And Monitoring Command Reference

Use undo mode to restore the default.
Syntax
mode { active | passive }
undo mode
Default
The data transmission mode of active is used by the FTP operation.
Views
FTP operation view, FTP template view
Predefined user roles
network-admin
mdc-admin
Parameters
active: Sets the data transmission mode to active. The FTP server initiates a connection request.
passive: Sets the data transmission mode to passive. The FTP client initiates a connection request.
Examples
# Set the data transmission mode to passive for the FTP operation.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type ftp
[Sysname-nqa-admin-test-ftp] mode passive
# In FTP template view, set the data transmission mode to passive for the FTP operation.
<Sysname> system-view
[Sysname] nqa template ftp ftptplt
[Sysname-nqatplt-ftp-ftptplt] mode passive

next-hop

Use next-hop to specify the next hop for the ICMP echo operation.
Use undo next-hop to remove the next hop IP address.
Syntax
next-hop ip-address
undo next-hop
Default
No next hop IP address is configured for the ICMP echo operation.
Views
ICMP echo operation view
Predefined user roles
network-admin
mdc-admin
42