HP FlexFabric 12500 Series Network Management And Monitoring Command Reference page 155

snmp-agent target-host inform address udp-domain { ip-address | ipv6 ipv6-address } [ udp-port
port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string v3
{ authentication | privacy }
snmp-agent target-host trap address udp-domain { ip-address | ipv6 ipv6-address } [ udp-port
port-number ] [ vpn-instance vpn-instance-name ] params securityname security-string v3
{ authentication | privacy }
undo snmp-agent target-host { trap | inform } address udp-domain { ip-address | ipv6 ipv6-address }
params securityname security-string [ vpn-instance vpn-instance-name ]
Default
No SNMP notification target host has been configured.
Views
System view
Predefined user roles
network-admin
mdc-admin
Parameters
inform: Sends notifications as informs.
trap: Sends notifications as traps.
address: Specifies the destination address of SNMP notifications.
udp-domain: Specifies UDP as the transport protocol.
ip-address: Specifies the IPv4 address of the target host as the destination of SNMP notifications.
ipv6 ipv6-address: Specifies the IPv6 address of the target host as the destination of SNMP notifications.
udp-port port-number: Specifies the UDP port for SNMP notifications. If no UDP port is specified, UDP
port 162 is used.
vpn-instance vpn-instance-name: Specifies the VPN for the target host. The vpn-instance-name argument
specifies the name of the MPLS L3VPN, a case-sensitive string of 1 to 31 characters. If this parameter is
not specified, the target host is in public network.
params securityname security-string: Specifies the authentication parameter. The security-string
argument specifies an SNMPv1 or SNMPv2c community name or an SNMPv3 username, a string of 1
to 32 characters.
v1: Specifies SNMPv1.
v2c: Specifies SNMPv2c.
v3: Specifies SNMPv3.
authentication: Specifies the security model to be authentication without privacy. You must specify
•
the authentication key when you create the SNMPv3 user.
privacy: Specifies the security model to be authentication with privacy. You must specify the
•
authentication key and privacy key when you create the SNMPv3 user.
Usage guidelines
You can specify up to 20 SNMP notification target hosts.
147