Bosch IRIS-Net User Manual page 559

IRIS-Net
Store a Presets
Element
Import / Export a Preset
IRIS-Net allows the storing of all DSP parameters of an sound system processor together with the according preset
name in a file, and to load sound system processor parameters from these files. Therefore, IRIS-Net creates a sub-
directory \Presets during installation, where all factory-presets are saved in to. It is recommended to save your own
presets in this directory as well. For improved organization, creating more sub-directories within the directory \Presets
is permissible.
Element
Bosch Security Systems B.V.
Description
STORE saves all momentary set DSP parameters together with the entered name
into the specified preset. Store is only possible if a user program number is
selected.
Clicking the STORE TO.... button opens the Store To Preset dialog. In this dialog
the Program Number can be selected and the corresponding Program Name can
be entered.
Description
After clicking onto IMPORT PRESET appears an "Open File ..." dialog box. Enter the
correct path of the directory in which the desired file is located and select the
desired preset file to be opened. This loads and afterwards displays all DSP
parameters that are stored within that file.
CAUTION: The loaded preset becomes instantly audible when in on-line mode. Be
sure to select the desired preset with the correct set of parameters. In the worst
case, this could lead to severe damage to the connected loudspeaker cabinets
due to improper signal processing!
After clicking onto EXPORT PRESET a "Save File ..." dialog box appears. Enter the
correct path of the directory that you want to save the data in. Enter a file name
(without extension). Click onto the SAVE button to store all DSP parameters
together with the corresponding file name. ".ds" is automatically added as file
extension.
User Manual
DIGITAL SOUND PROCESSOR | en
2017.05 | 3.20 | F.01U.119.956
559