Bosch IRIS-Net User Manual page 669

IRIS-Net DIGITAL SOUND PROCESSOR | en 669
Filter Editing via "Mouse Movement" in the Graphics Display
A white dot in the frequency response display represents an active filter (Checkbox OFF Off not engaged). Clicking
with the left mouse button on this dot and keeping the mouse button pressed down allows changing the selected
filter's amplification by moving the mouse up or down. Clicking with the right mouse button on the white dot and
keeping the mouse button pressed down allows changing the Q-value of the filters by moving the mouse up or down.
For an improved overview the fader of the corresponding filter band appears in color as soon as the mouse cursor is
positioned over its white dot.
INPUT DELAY
Individual input delays can be set for each input channel of the Dx46.
HINT: The Input Delay parameter is especially useful for delay lines. In this case the required delay depends only on
the position of the delay line and is identical for all ways, e.g. output channels of the Dx46. By editing the Input
Delay parameter the delays of all output channels routed to this input are adjusted automatically.
You can select the input delay window by clicking onto the fourth block (DLY) in the Flow Diagram Selector or onto the
INPUT PROCESSING DELAY block in the flow diagram.
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956