Bosch IRIS-Net User Manual page 577

IRIS-Net DIGITAL SOUND PROCESSOR | en 577
DSP 244 Device
Start by creating an DSP 244 Device in your IRIS-Net project. Drag an DSP 244 from the Object Bar's Devices category
or from the Devices window into the worksheet. The following dialog box appears:
Enter the required number of devices and select a communication interface. Click on the OK button to accept these
settings. The specified number of DSP 244 Devices will be created and displayed in the worksheet. Selected devices
can be dragged around and repositioned at will. To select a device either click and drag the mouse to draw a rectangle
around it or hold down the Ctrl key and click on the device. In either case a successfully selected device is shown with
a red border around it.
Double clicking on an DSP 244 device icon opens the Userpanel.
CONFIGURATION OF THE INTERFACE
For using the DSP 244 device in IRIS-Net the used COM port of the PC has to be selected. When using an USB-RS-485
adapters the system internal COM port can be found in the Control Panel, see following picture.
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956