Bosch IRIS-Net User Manual page 796

IRIS-Net
Select the UI-1 Universal Input Module of the DPM 8016 the call station is connected to.
Specify the desired number of devices, the address of the call station and number of call station extensions (it is not
possible to add extensions to a call station kit). Click on the OK button to accept these settings.
The specified number of Call Stations will be created and displayed in the worksheet. Selected devices can be dragged
around and repositioned at will. To select a device either click and drag the mouse to draw a rectangle around it or
hold down the 'ctrl' key and click on the device. In either case a successfully selected device is shown with a red
border around it.
Double clicking on a Call Station device icon opens the configuration dialog window. Double clicking on a device for
the first time will open the Configuration dialog box. Here, you can specify initial settings that are necessary for further
configuration and communication. Additional configuration windows can be navigated to by clicking on the icons at the
top of the window. However, as a basic rule, IRIS-Net will remember which window was used last and reopen to this
window next time you double click on the Call Station device icon.
The following table lists all available DPC 8015 dialogs with a short description for each. For more detailed
information, please refer to the appropriate chapters.
Dialog
Configuration
Diagnostics
Configuration
This page allows making basic settings and retrieve information, for example of button functions, network settings,
device name, firmware version, etc.
Bosch Security Systems B.V.
Description
This window allows hardware settings to be configured, e.g. button configuration,
network settings, device name.
This window provides an overview of the operational state and current fault status of
the call station.
User Manual
PROMATRIX 8000 | en 796
2017.05 | 3.20 | F.01U.119.956