Mitsubishi Electric Q01UCPU User Manual page 453

Parameter
Item
No.
IP Address Setting
Communication Data
1016
Code
*1
Ethernet Conf. /Open
Setting
FTP Setting
Time Setting
MELSOFT Connection
101F
*1
Extended Setting
Network
1030
Configuration
CC-Link
Setting
IEF Basic
*1
Setting
Refresh
1031
Setting
Enable online change
(FTP, MC Protocol)
Disable direct connection
to MELSOFT
1016
Do not respond to search
for CPU (Built-in Ethernet
port) on network
IP packet transfer setting
*1 This setting item is available to the High-speed Universal model QCPU. Before setting this item, check the versions of
the CPU module and GX Works2 used. (
Description
• IP Address:
Enter the IP address of the
CPU module.
• Subnet Mask Pattern:
Enter the subnet mask pattern
when using a router.
• Default Router IP Address:
Enter the IP address of the
router.
Select the code for MC protocol
H
communication.
Set when using the following
functions.
• MC protocol
• MELSOFT connection
• Socket communication
• Predefined protocol
Set data when using the file
transfer function (FTP).
Set data when using the time
setting function.
Set data when using the
MELSOFT connection extended
H
setting.
Set the network configuration
when using CC-Link IE Field
H
Network Basic.
Set this parameter to refresh link
device data to the internal device
H
or file register automatically.
Enable or disable writing data in
devices or files to the running
CPU module when MC protocol or
FTP is used.
Enable or disable direct
connection to MELSOFT.
To enhance the security with the
remote password setting, check it
to disable it.
H
Checking this box disables
response to the find CPU function
of the MELSOFT connection.
To enhance the security, check it
to disable this.
Set data when using IP packet
transfer function.
Setting range
• IP Address:
0.0.0.1 to 223.255.255.254
(00000001 to 0DFFFFFFE
H H
• Subnet Mask Pattern:
Blank or
192.0.0.0 to 255.255.255.252
(0C0000000 to 0FFFFFFFC
H
• Default Router IP Address:
Blank or
0.0.0.1 to 223.255.255.254
(00000001 to 0DFFFFFFE
H H
Binary Code/ASCII Code
-
-
-
-
-
-
Selected/deselected
Selected/deselected
Selected/deselected
Use/Not used
Page 462, Appendix 2)
APPENDICES
Default Reference
• IP Address:
)
192.168.3.39
• Subnet Mask
Pattern:
Blank
)
H
• Default Router
IP Address:
Blank
)
QnUCPU User's
Binary Code
Manual
(Communication
via Built-in
Ethernet Port)
Blank
Blank
Blank
Blank
Blank
CC-Link IE Field
Network Basic
Reference
Manual
Blank
Deselected
QnUCPU User's
Manual
Deselected
(Communication
via Built-in
Ethernet Port)
Deselected
Manual for the
CC-Link IE Field
Not used
Network module
used
A
451