Mitsubishi Electric Q01UCPU User Manual page 463

Parameter
Item
No.
Password Setting -
Model
-
Password
Name
Active
Module
Setting
Start XY -
Detail -
User Connection
-
*1
No.
*2
-
System Connection
Regard as Error when
Remote Password
-
Mismatch Count
Reaches Upper Limit
Upper Limit of
-
Mismatch
*1 This is a connection used by users for communications using the MC protocol or fixed buffer.
*2 This is a connection used by a system for FTP or MELSOFT (TCP/IP, UDP/IP) communications.
Description
Enter a remote password.
Select a model name of the
module for which the remote
password set to the CPU module
is checked.
Set the start address of the
module for which the remote
password is checked.
Set details of the remote
password for the QJ71E71.
Select user connection No.
Select a valid port of the remote
password for system connection.
Set upper limit of mismatch count.
Set upper limit of remote
password mismatch count.
Setting range
Four characters or less (alphanumeric
characters, special symbols)
• Built-in Ethernet port QCPU
• QJ71E71
• QJ71C24/CMO
0000 to 0FE0
H H
-
Connection 1 to Connection 16
• Built-in Ethernet port QCPU
• MELSOFT Transmission Port (TCP/IP)
• MELSOFT Transmission Port (UDP/IP)
• FTP Transmission Port (TCP/IP)
• Direct Connection of MELSOFT
• QJ71E71
• Auto Open UDP Port
• FTP Transmission Port (TCP/IP)
• MELSOFT Application Transmission
Port (TCP/IP)
• MELSOFT Application Transmission
Port (UDP/IP), Dedicated Instruction,
CC-Link IE, NET/10(H) Relay
Transmission Port
• HTTP Port, HTTP Protocol
Set whether to regard it as an error when
the number of mismatches on remote
password reaches the upper limit.
1 to 65535
APPENDICES
Default Reference
-
-
-
• Built-in Ethernet
port QCPU:
-
QnUCPU User's
Manual
-
(Communication
via Built-in
Ethernet Port)
• QJ71E71:
Ethernet module
manual
• QJ71C24:
Serial
communication
-
module manual
• QJ71CMO:
Modem
interface module
manual
Unchecked
10
461
A