Mitsubishi Electric Q01UCPU User Manual page 485

(12)Batch transfer of data to the program memory
When data in the program cache memory is batch-transferred to the program memory, the processing time listed
in the following table is required.
*1 The time in the table is for the case where the service processing count is set to one.
CPU module
Q00UJCPU, Q00UCPU, Q01UCPU
Q02UCPU
Q03UDCPU
Q04UDHCPU, Q06UDHCPU, Q10UDHCPU, Q13UDHCPU,
Q20UDHCPU, Q26UDHCPU
Q03UDECPU, Q04UDEHCPU, Q06UDEHCPU, Q10UDEHCPU,
Q13UDEHCPU, Q20UDEHCPU, Q26UDEHCPU,
Q50UDEHCPU, Q100UDEHCPU
Q03UDVCPU, Q04UDVCPU, Q06UDVCPU, Q13UDVCPU,
Q26UDVCPU
(13) Diagnostics of the
When the "Diagnose Redundant Power Supply System" is selected on the PLC RAS tab of the PLC parameter
dialog box, the processing time listed in the following table is required.
CPU module
Q00UCPU
Q01UCPU
Q02UCPU
Q03UD(E)CPU, Q03UDVCPU, Q04UD(E)HCPU, Q04UDVCPU,
Q06UD(E)HCPU, Q06UDVCPU, Q10UD(E)HCPU,
Q13UD(E)HCPU, Q13UDVCPU, Q20UD(E)HCPU,
Q26UD(E)HCPU, Q26UDVCPU, Q50UDEHCPU,
Q100UDEHCPU
*1 A power supply module failure indicates any of the following.
• The redundant power supply module has failed.
• Power for the redundant power supply module is turned off.
• The redundant power supply module is not mounted.
(14)A-PLC compatibility setting
When "A-PLC Compatibility Setting" is enabled in the PLC System tab of the PLC Parameter dialog box, the
processing time listed in the following table is required.
Q00UJCPU, Q00UCPU, Q01UCPU
Q02UCPU
Q03UD(E)CPU, Q04UD(E)HCPU, Q06UD(E)HCPU, Q10UD(E)HCPU,
Q13UD(E)HCPU, Q20UD(E)HCPU, Q26UD(E)HCPU, Q50UDEHCPU,
Q100UDEHCPU
Q03UDVCPU, Q04UDVCPU, Q06UDVCPU, Q13UDVCPU, Q26UDVCPU
*1
redundant power supply system
CPU module
Processing time
Scan time = 2ms
2.35ms
2.35ms
1.10ms
1.05ms
1.40ms
0.60ms
Processing time
With a power supply
*1
module failure
s
125µ
s
125µ
s
90µ
s
43µ
Processing time
APPENDICES
Scan time = 20ms
5.10ms
4.50ms
3.65ms
3.65ms
4.00ms
0.60ms
Without a power supply
*1
module failure
s
165µ
s
135µ
s
90µ
s
52µ
95µs
90µs
34µs
13µs
483
A