3.12
Writing Programs While CPU Module is in RUN Status
There are two ways of writing programs in the RUN status.
Online change (ladder mode
•
Online change (files) :
•
Data can also be written in the RUN status using a pointer. (
3.12.1
Online change (ladder mode)
This function writes programs to the CPU module in the RUN status. This function enables the program in ladder mode
to be changed without stopping the program operation in the CPU module.
Change a program with programming tool and
write it to the CPU module in the RUN status.
166
) :
Page 169, Section 3.12.2
X0 X2
Y30
X1
X3 X4
SET M10
X5
END
Page 166, Section 3.12.1
Page 190, Section 3.15.2)
Programming tool