Panasonic KX-TD500 Programming Manual page 159

Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
[UCD Setting] Supervisor Extension
Blank
3-4 digits consisting of 0-9
Specifies the Supervisor Extension per UCD Group.
The extension specified as the Supervisor Extension can monitor
the number of waiting calls (calls placed in the waiting queue) and
the Login/Logout status of UCD Group members through the
corresponding DSS buttons.
• 1.3 System Features (F/G)
– Incoming Group
• 1.5 Attended Features (F/G)
– Uniform Call Distribution (UCD)
[UCD Setting] UCD Call Waiting
Enable
1.
Disable
2.
Enable
This feature is different from regular Call Waiting. This feature (if
enabled) allows UCD group members to hear a Call Waiting tone
when an inside / outside call arrives but all the extensions in the
UCD Group are busy.
Notes
• To use this feature, this setting must be set to enable.
• In addition, each extension must enable regular Call
Waiting.
• 1.3 System Features (F/G)
– Incoming Group
• 1.5 Attended Features (F/G)
– Uniform Call Distribution (UCD)
Group
159