Automatic Registration; Ddi / Did / Msn No. - Panasonic KX-TD500 Programming Manual

DDI/DID
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
308

Automatic Registration

—
—
You can enter into "Automatic Registration" screen (Section 9.2.2)
by clicking
None

DDI / DID / MSN No.

Blank
Up to 16 digits consisting of 0-9
Specifies the DDI / DID / MSN number which will be sent from the
Central Office to the KX-TD500 system.
Note
• The DDI / DID / MSN number which has already been
assigned cannot be registered.
• 1.5 Attended Features (F/G)
– Direct Inward Dialling (DID)
• 2.4 ISDN Attended Features (F/G)
– Direct Dialling In (DDI)
– Multiple Subscriber Number (MSN) Ringing Service
Tenant No.
1
1-8
Specifies the tenant used for DDI / DID call when "DID / DDI No."
is specified in "Tenant Select Mode for DID / DDI" programming
in Section "2.8 System Option."
• 1.5 Attended Features (F/G)
– Direct Inward Dialling (DID)
• 2.4 ISDN Attended Features (F/G)
– Direct Dialling In (DDI)
• 2.8 System Option (P/G)
– Tenant Select Mode for DID / DDI
on this screen.
Programming Guide