Summer Time / Daylight-saving Time Setting
Note
The start and end dates of the summer time can be programmed. The system clock will be
adjusted (one hour forward or backward) at 2:00 AM of the programmed date, if enabled. It
means 2:00 AM will become 3:00 AM on the start date of the summer time, and 2:00 AM will
become 1:00 AM on the end date. If "Timed Reminder" or "Day/Night Switching Mode"
feature is set between 1:00 AM and 3:00 AM, it may not work properly.
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
Setting
Disable
1.
Disable
2.
Enable
Enables or disables the automatic adjustment of the clock for
summer time.
None
Start (Month)
Blank
Jan-Dec
Selects the month by clicking the small triangle.
None
End (Month)
Blank
Jan-Dec
Selects the month by clicking the small triangle.
None
Start (Day)
Blank
01-31
Specifies the date in two digits by entering the value directly.
None
Maintenance
337