Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Programming Guide
Transfer to CO
Disable
1.
Enable
2.
Disable
Enables or disables "Call Transfer to Trunk" feature.
• 2.4.3 Transferring a Call (U/M)
Call FWD to CO/TIE
Disable
1.
Enable
2.
Disable
Enables or disables "Call Forwarding to Trunk" feature.
• 2.5.1 Forwarding Your Calls (Call Forwarding) (U/M)
Off-Hook Call Announcement (OHCA)
Enable
1.
Enable
2.
Disable
Specifies whether to utilise OHCA / Whisper OHCA feature or not.
Note
• This setting is valid at the following PT extensions:
[OHCA]
When the called extension is using the KX-T7130, KX-
T7235, KX-T7436 or KX-T7536
[Whisper OHCA]
When both calling and called extensions are using one of the
KX-T7400 series PTs (except KX-T7451) or KX-T7500
series PTs
• 1.6 Originating Features (F/G)
– Off-Hook Call Announcement (OHCA)
– Off-Hook Call Announcement (OHCA), Whisper
• 2.7.3 Receiving a Call Waiting (Call Waiting/Off-Hook Call
Announcement [OHCA]/Whisper OHCA) (U/M)
System
71