System
2.4 Class of Service (COS)
2.4.1 Class of Service (COS) 1/2
Used to assign the Class of Service (COS) parameters.
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
68
COS No.
1
1-96
Specifies the COS (1-96) which you are going to programme.
• 1.3 System Features (F/G)
– Class of Service (COS)
• 4.3 Extension Line (P/G)
Trunk Group Setting
—
—
You can enter into "Trunk Group Setting" screen (Section 2.4.2) by
clicking
None
on this screen.
Programming Guide