Panasonic KX-TD500 Programming Manual page 30

Configuration
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
30
Receiver Type
Undefined
1.
Undefined
2.
Pulse
3.
DTMF
4.
MFC-R2
Specifies the dial type when receiving an incoming call.
1.
Undefined: Not assigned.
2.
Pulse: DP Signalling sending / receiving
3.
DTMF: DTMF Signalling sending / receiving
4.
MFC-R2: MFC-R2 Signalling sending / receiving
(Digital signalling system-R2 only)
None
Status
—
1.
INS
2.
OUS
3.
FAULT
Specifies the operating status of the E1 port.
1.
INS: The E1 port is In-Service.
2.
OUS: The E1 port is Out-of-Service.
3.
FAULT: The E1 port is defective (hardware).
In this case, the LED indicator on the E1 card will light.
None
Programming Guide