System
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
Parameter
Default
Value Range
Description/Function
Reference
46
System Speed Dialing Entries Max.
Tenant No. 1:1000, Tenant No. 2:1000, Tenant Nos. 3-8:0
0-1000 in 20 codes increments
Specifies the maximum number of Speed Dialling codes available
for each tenant.
Note
• Up to 2000 Speed Dialling codes can be shared among
tenants under the restriction of up to 1000 codes per tenant.
• 5.2 System Speed Dialling (P/G)
Automatic Route Selection
No check
1.
Check [Enable]
2.
No check [Disable]
Specifies whether to utilise ARS (Automatic Route Selection) or
not. If set to "No" (No check), "Trunk Access, Idle" is activated
instead of ARS when an extension user dials "9: [SA]" or "0:
Others" for making an outside call.
• 1.6 Originating Features (F/G)
– Automatic Route Selection (ARS)
• 7.1 ARS (Automatic Route Selection) (P/G)
External Paging Tone
Check
1.
Check [Enable]
2.
No check [Disable]
If checked, a confirmation tone is emitted from external pagers
before voice announcement.
• 1.14 Paging Features (F/G)
– Paging
• 2.6.1 Paging (U/M)
Programming Guide