Display Poe Pse Interface Power - HP MSR1003-8S Command Reference Manual

display poe pse interface power

Use display poe pse interface power to display power information for PIs on a PSE.
Syntax
display poe pse pse-id interface power
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
pse pse-id: Specifies a PSE by its ID.
Usage guidelines
To display PSE ID and slot mappings, use the display poe device command.
Examples
# Display power information for PIs on PSE 7.
<Sysname> display poe pse 7 interface power
Interface
GE2/0/25
GE2/0/26
GE2/0/27
GE2/0/28
GE2/0/29
GE2/0/30
--- On State Ports: 3; Used: 23.8(W);
Table 28 Command output
Field
Interface
Current
Peak
Max
PD Description
Ports On
Used
Remaining
Current Peak
(W) (W)
4.4 4.5
4.4 4.5
15.0 15.3
0.0 0.0
0.0 0.0
0.0 0.0
Max PD Description
(W)
4.6 IP Phone on Room 309 for Peter Smith
15.4 IP Phone on Room 409 for Peter Pan
15.4 Access Point on Room 509 for Peter
5.0 IP Phone on Room 609 for Peter John
4.0 IP Phone on Room 709 for Jack
5.0 IP Phone on Room 809 for Alien
Remaining: 776.2(W) ---
Description
Interface name of a PI.
Current power of a PI.
Peak power of a PI.
Maximum power of a PI.
Type and location description for the PD connected with a PI.
Number of PIs that are supplying power.
Power consumed by all PIs.
Remaining power on the PSE.
139