Snmp-Agent Community-Map - HP MSR1003-8S Command Reference Manual

<Sysname> system-view
[Sysname] acl basic name testacl
[Sysname-acl-ipv4-basic-testacl] rule permit source 1.1.1.2 0.0.0.0
[Sysname-acl-ipv4-basic-testacl] rule deny source any
[Sysname-acl-ipv4-basic-testacl] quit
[Sysname] snmp-agent sys-info version v2c
[Sysname] snmp-agent community write simple writeaccess acl name testacl
# Create the read and write community wr-sys-acc in plain text so an SNMPv1 or SNMPv2c NMS can
use the community name wr-sys-acc to read or set the MIB objects in the system subtree (OID
1.3.6.1.2.1.1).
<Sysname> system-view
[Sysname] snmp-agent sys-info version v1 v2c
[Sysname] undo snmp-agent mib-view ViewDefault
[Sysname] snmp-agent mib-view included test system
[Sysname] snmp-agent community write simple wr-sys-acc mib-view test
Related commands
display snmp-agent community
•
snmp-agent mib-view
•

snmp-agent community-map

Use snmp-agent community-map to map an SNMP community to an SNMP context.
Use undo snmp-agent community-map to delete the mapping between an SNMP community and an
SNMP context.
Syntax
snmp-agent community-map community-name context context-name
undo snmp-agent community-map community-name context context-name
Default
No mapping between an SNMP community and an SNMP context exists on the device.
Views
System view
Predefined user roles
network-admin
Parameters
community-name: Specifies an SNMP community, a case-sensitive string of 1 to 32 characters.
context-name: Specifies an SNMP context, a case-sensitive string of 1 to 32 characters.
Usage guidelines
This command enables a module on an agent to obtain the context mapped to a community name when
an NMS accesses the agent by using SNMPv1 or SNMPv2c.
You can configure a maximum of 10 community-context mappings on the device.
180