Monitor Thread - HP MSR1003-8S Command Reference Manual

monitor thread

Use monitor thread to display thread statistics.
Syntax
Centralized devices in standalone mode:
monitor thread [ dumbtty ] [ iteration number ]
Distributed devices in standalone mode/centralized devices in IRF mode:
monitor thread [ dumbtty ] [ iteration number ] [ slot slot-number [ cpu cpu-number ] ]
Distributed devices in IRF mode:
monitor thread [ dumbtty ] [ iteration number ] [ chassis chassis-number slot slot-number [ cpu
cpu-number ] ]
Views
Any view
Predefined user roles
network-admin
Parameters
dumbtty: Specifies dumbtty mode. In this mode, the command displays all thread statistics in descending
order of CPU usage without refreshing statistics. If you do not specify the keyword, the command displays
statistics for top 10 processes in descending order of CPU usage in an interactive mode, and refreshes
statistics every 5 seconds by default.
iteration number: Specifies the number of display times, in the range of 1 to 4294967295. If you specify
the dumbtty keyword, the number argument is 1 by default. If neither the dumbtty keyword nor the
number argument is specified, there is no limit to the display times.
slot slot-number: Specifies a card by its slot number. If you do not specify this option, the command
displays thread statistics for the active MPU. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, this command displays information for the master device. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies a card on an IRF member device. The chassis-number
argument represents the member ID of the IRF member device. The slot-number argument represents the
slot number of the card. If you do not specify a card, this command displays information for the global
active MPU. (Distributed devices in IRF mode.)
cpu cpu-number: Specifies a CPU by its number. (Distributed devices in standalone or IRF
mode/centralized devices in IRF mode.)
Usage guidelines
If you do not specify the dumbtty keyword, the command displays thread statistics in an interactive mode.
In this mode, the system automatically determines the number of displayed thread processes according
to the screen size and does not display exceeding processes. You can also input interactive commands
as shown in Table 75 to perform relevant operations.
345