Snmp-Agent Usm-User V3 User-Role - HP MSR1003-8S Command Reference Manual

plaintext authentication key 123456TESTauth&!, and the plaintext privacy key 123456TESTencr&! for the
user.
<Sysname> system-view
[Sysname] snmp-agent group v3 testGroup privacy
[Sysname] snmp-agent usm-user v3 testUser testGroup simple authentication-mode sha
123456TESTauth&! privacy-mode aes128 123456TESTencr&!
# For an NMS to access the MIB objects in the default view ViewDefault, make sure the following
configurations on the NMS are the same as the SNMP agent:
SNMPv3 username.
•
SNMP protocol version.
•
Authentication algorithm.
•
• Privacy algorithm.
Plaintext authentication and privacy keys.
•
# Add the user remoteUser for the SNMP remote engine at 10.1.1.1 to the SNMPv3 group testGroup, and
enable the authentication and privacy security model for the group. Specify the authentication algorithm
SHA- 1 , the privacy algorithm AES, the plaintext authentication key 123456TESTauth&!, and the plaintext
privacy key 123456TESTencr&! for the user.
<Sysname> system-view
[Sysname] snmp-agent remote 10.1.1.1 engineid 123456789A
[Sysname] snmp-agent group v3 testGroup privacy
[Sysname] snmp-agent usm-user v3 remoteUser testGroup remote 10.1.1.1 simple
authentication-mode sha 123456TESTauth&! privacy-mode aes128 123456TESTencr&!
In RBAC mode:
# Create the SNMPv3 user testUser with the user role network-operator and enable the authentication
without privacy security model for the user. Specify the authentication algorithm SHA- 1 and the
authentication key 123456TESTplat&! in plain text for the user.
<Sysname> system-view
[Sysname] snmp-agent usm-user v3 testUser user-role network-operator simple
authentication-mode sha 123456TESTplat&!
# For an NMS to have read-only access to all MIB objects, make sure the following configurations on the
NMS are the same as the SNMP agent:
SNMPv3 username.
•
SNMP protocol version.
•
Authentication algorithm and key.
•
Related commands
• display snmp-agent usm-user
snmp-agent calculate-password
•
snmp-agent group
•
snmp-agent remote
•

snmp-agent usm-user v3 user-role

•
snmp-agent usm-user v3 user-role
Use snmp-agent usm-user v3 user-role to assign a user role to an SNMPv3 user created in RBAC mode.
204