6.11.2 Run/stop control with frequency command
f241 : Operation starting frequency
f242 : Operation starting frequency hysteresis
Function
The Run/stop of operation can be controlled simply with frequency command.
[Parameter setting]
Title
Operation starting frequency
f241
Operation starting frequency hysteresis
f242
Output frequency [Hz]
+
-
Function
0.0-fh (Hz)
0.0-fh (Hz)
0
A
B
F-45
Adjustment range
When the frequency command signal
reaches the B point, the inverter
operates.
When decelerating, operation stops
when the frequency setting signal is less
than point A.
100% Frequency command value
E6581926
Default setting
0.0
0.0
6