Toshiba Tosvert VF-S15 Instruction Manual page 18

1.3.2
 Never touch the internal connector while the upper cover of control panel is opened.
Prohibited
1
 When removing and mounting the terminal cover or the terminal block with a screwdriver, be sure not
 Pressing too hard on the screwdriver can scratch the inverter.
Mandatory
 Always turn the power off when removing the wiring cover.
action
 After wiring is complete, be sure to replace the terminal cover.
Use the following procedure to open the terminal cover and pull the power terminal block.
Inverter type
VFS15-2002PM to 2007PM
VFS15S-2002PL to 2007PL
VFS15-2015PM to 2037PM
VFS15S-2015PL, 2022PL
VFS15-4004PL to 4015PL
VFS15-4022PL, 4037PL
VFS15-2055PM to 2150PM
VFS15-4055PL to 4150PL
Opening terminal cover and terminal block
There is a risk of electrical shock because it carries a high voltage.
to scratch your hand as these results in injury.
Procedure
In the beginning, remove the outside terminal
block cover.
Next, remove the inside terminal block cover.
In the beginning, remove the outside terminal
block cover.
Next, remove the inside terminal block cover.
In the beginning, remove the outside terminal
block cover.
Next, remove the inside terminal block cover.
Follow a procedure and remove the power
terminal cover.
Warning
Caution
A-6
E6581926
Reference
number
(1)
(2)
(3)
(4)
(3)
(5)
(6)