Cab Maintenance
Cleaning the Cab
For Machines with a Cab
Important:
Use care around the cab seals and
lights
(Figure
147). If you are using a pressure
washer, keep the washer wand at least 0.6 m (2 ft)
away from the machine. Do not use the pressure
washer directly on the cab seals and lights or
under the rear overhang.
1
Figure 147
1. Seal
2. Light
Cleaning the Cab Air Filters
Service Interval: Every 250 hours
1. Remove the screws and grates from both the
in-cab and rear cab air filters
Figure
149).
2
3
4
G034330
g034330
3. Keep wand 0.6 m (2 ft)
away.
4. Do not pressure-wash
under the rear overhang.
(Figure 148
and
1
1. Filter
2. Grate
Rear Cab Air Filter
1. Filter
2. Grate
2. Clean the filters by blowing clean, oil-free,
compressed air through them.
Important:
If either filter has a hole, tear, or
other damage, replace the filter.
3. Install the filters and the grate with the thumb
screws.
94
3
Figure 148
In-Cab Air Filter
3. Screw
1
2
3
Figure 149
3. Screw
2
g028378
g028378
2
g028379
g028379