Table of Contents
Advertisement
G
eneral conditions
Some recommendation apply only to large size product or multiple small size packings.
T
ransport and handling
L
ifting
The ropes and means used for lifting must be suitable for bearing the weight of the equipment.
U
npacking and checking
The components of the packaging must be disposed on in accordance with the regulations in
force in the country of installation.
Lifting and transport
Transport of the equipment, especially by road, must be carried out with
by suitable ways and means for protecting the components (in particular,
the electronic components) from violent shocks, humidity, vibration, etc.
During handling, do not make any sudden or fast movements that
can create dangerous swinging.
ABB usually stores and protects individual components by suitable
means to make their transport and subsequent handling easier, but as a
rule it is necessary to turn to the experience of specialized staff in change
of loading and unloading the components.
Where indicated and/or where there is a provision, eyebolts or handles,
which can be used as anchorage points, are inserted and/or can be
inserted.
Do not lift several units or or parts of the equipment at the same time,
unless otherwise indicated.
We remind you that the packaging elements (cardboard, cellophane,
staples, adhesive tape, straps, etc.) may cause cuts and/or injuries if not
handled with care. They should be removed by suitable means and not
left in the hands of irresponsible people (e.g., children).
When you open the package, check that the equipment is undamaged
and make sure all the components are present.
If you find any defects or damage, stop unpacking and consult the carrier,
and also promptly inform the Service ABB.
- 18 -
4
Hide quick links:
Advertisement
Table of Contents
