ABB VSN300 Product Manual page 32

In the case of installations where
more than one router is available
(for example, with
functions), the indication of the
signal in dBm is useful for selecting
the network with the largest signal.
In most setups, the correct mode
is DHCP, and therefore the IP
address does not need to be
entered manually. Only access
the static setup mode if necessary
and if all the network parameters
are known.
Identify and select the appropriate Wi-Fi network from the drop-down
menu selecting from amongst the networks detected by the board. A new
network search can be carried out by using the Scan button.
The networks are ordered on the basis of the power of the signal received
in dBm (from the strongest to the weakest).
Once the network has been selected, confirm.
repeater
Select the mode for assigning the IP addresses configured on the
destination network, selecting from DHCP (default) and Static (manual
setup).
- 32 -
5 - Installation