ABB VSN300 Product Manual page 55

Selection of the network, logger,
plant data settings or the inverter
parameter settings
Inverter settings
(modifiable fields)
The function is not available for all
ABB inverter models. For further
information, refer to the documen-
tation available on the official ABB
website
Selection of the network, logger,
plant data settings or the inverter
parameter settings
Plant data
(modifiable fields)
Saves the modifications made
In the Plant Details board, the plant data which was entered previously
during the installation phase can be viewed and modified.
The main parameters of the inverter can be modified using the Inverter
Parameters setting board and since the VSN300 board is installed in the
Inverter Parameters setting board, this means that it is not necessary to
operate directly on the board itself. Modifying a parameter is obviously
allowed within the range of permitted values. Outside of this range, it is
not possible to confirm the modification (by clicking on «SAVE» as with
the other boards).
- 55 -
7 - Operation